Installing IFS steering box on 79-85 Toyota Truck
Mounting an IFS steering box on a 1979 – 1985 Truck or 4Runner. First remove the original steering box, torque arm and bracket from the frame. This may require the use of an torch and or, a grinder to remove the Original steering box bracket. Once the bracket has been removed from The frame you can precede with the installation of the IFS box mount.
There are three bolts that hold the IFS box onto the frame. Two bolts go through the frame and one goes through a bracket Welded above the frame. You can purchase this bracket from any Toyota specialty site.
You must be careful when picking your mounting position – Too high and the pitman arm will hit the frame, too low and The leaf spring will hit the pitman arm, too far back and The tie rod will hit the drag link. So take caution on you placement.
1979-1983 vehicle frames are one inch shorter from the fire wall. This will have no significant effect on your placement of the IFS box. Place the steering box on the frame and move it forward until it Touches the body mount. Rotate the steering box so that the steering Shaft to the steering wheel is almost straight.
